HDMI-TPX-RX109DU2K
SKU: 91580019
ShippingHDMI 2.0 over Direct-link SDVoE receiver with USB 2.0 and Dante audio
Details
Specification Table
| General | |
| Compliance | UL, CE |
| Electrical safety | IEC/EN/UL/CSA 62368-1:2014, Class II |
| EMC (emission) | IEC/EN 55032:2015 |
| EMC (immunity) | IEC/EN 55035:2017 |
| RoHS | EN 63000:2018 |
| Warranty | 3 years |
| Operating temperature | 0° to +50°C (+32° to +122°F) |
| Storage temperature | -30° to +80˚C (-22° to +176˚F) |
| Operating humidity | 10% to 90%, non-condensing |
| Cooling | passive |
| Power | |
| Power supply option | Power adaptor / PoE |
| Supported power source | |
| Power consumption (max) | TBD |
| Power consumption (min) | |
| Heat dissipation | TBD |
| AC power connector | |
| AC fuse | |
| Power over Ethernet (PoE+) | via TPX input (IEEE802.3at) (can send and receive power) |
| Power adaptor | |
| Supported power source | 100-240 V AC; 50/60 Hz |
| Supplied power | 48V DC, 0.83A |
| AC power plug | Interchangable (EU, UK, JP/US, AUS/NZ) |
| DC power plug | 2-pole Phoenix, orange |
| Enclosure | |
| Rack mountable | No |
| Enclosure material | 1 mm steel |
| Dimensions in mm | 138 W x 151.8 D x 26 H |
| Dimensions in inch | 5.43 W x 5.98 D x 1.02 H |
| Weight | 0.646 kg |
| TPN input | |
| Connector type | RJ45 connector |
| Power over Ethernet (PoE+) | IEEE 802.3at (PD + PSE) |
| Compliance | SDVoE |
| HDCP compliance | HDCP2.3 |
| Transferred signals | Video, Audio, RS-232, Infrared, Ethernet |
| Color space | RGB, YCbCr |
| Video delay | 0 frame |
| Supported resolutions at 8 bits/color * | up to 4096x2048@60Hz (4:4:4) |
| up to 3840x2160@60Hz (4:4:4) | |
| 4096x2048@60Hz (4:2:2) up to 10 bits/color | |
| Audio formats | All HDMI 2.0 formats including multi-channel PCM, Dolby True-HD and DTS-HD master audio |
| HDMI output | |
| Connector type | 19-pole HDMI Type A receptacle |
| A/V standard | DVI 1.0, HDMI 1.4, HDMI 2.0 |
| HDCP compliance | HDCP 2.3 |
| Color space | RGB, YCbCr |
| Supported resolutions at 8 bits/color * | up to 4096x2048@60Hz (4:4:4) |
| up to 3840x2160@60Hz (4:4:4) | |
| 4096x2048@60Hz (4:2:2) up to 10 bits/color | |
| Audio formats | All HDMI 2.0 formats including multi-channel PCM, Dolby True-HD and DTS-HD master audio |
| Dante®/AES67 Output Port | |
| Connector type | RJ45 female connector |
| Audio formats | 2-ch PCM |
| Sampling frequency | 48 kHz |
| Volume | -78 dB - 0 dB |
| Balance | 0 - 100 (50 = center) |
| Nominal Differential Output Level @ 0 dB Gain | +4 dBu |
| Nominal Differential Output Level @ 3 dB Gain | +7 dBu |
| USB port | |
| Connector type | 2x USB-A female (device, composite mode) |
| USB compliance | USB2.0 |
| Device class | HID |
| Powering | Max 0.325A@5V (total) |
| USB port | |
| Connector type | 4x USB-A female (device, transparent mode) |
| USB compliance | USB2.0 |
| Device class | Audio, Video, Mass Storage, HID, HUB, Smart Card, Vendor specific |
| Powering | Max 1.08A@5V (per port), Max 1.75A@5V (total) |
| Control Ports | |
| RS-232 serial port | |
| Connector type | 3-pole Phoenix connector |
| Baud rates | Between 4800 and 115200 Baud |
| Data bits | 8 or 9 |
| Parity | None / Odd / Even |
| Stop bits | 1 / 1.5 / 2 |
| Ethernet port | |
| Connector type | RJ45 female connector (2) |
| Ethernet data rate | 10/100/1000Base-T, full duplex with autodetect |
| Power over Ethernet (PoE) | No |
The HDMI-TPX-TX209DU2K and HDMI-TPX-RX109DU2K transmitter and receiver devices are based on SDVoE technology and allow users to extend HDMI 2.0 compliant video, audio and control signals from a single source to a single destination when they are directly connected. Moreover, these USB2.0 capable extenders also allow transparent and composite USB2.0 transmission in the opposite direction.
Beyond the benefits of sending high-resolution video and USB2.0 data over long distances, the extenders are also able to handle various connectivity standards, including a 1G user Ethernet channel over the 10G link, as well as command injection into RS-232.
The Gigabit Ethernet ports are also valuable additions, allowing users to connect Ethernet capable devices to the network directly through the TPX extenders. This is particularly useful for controlling external devices like projectors and displays.
HDCP 2.3 and basic EDID management functionality are also among the features offered by these devices, such as their connectivity and easy integration into a wide range of AV operations and with 3rd party devices, such as the Christie Terra projector.
Composite USB2.0 transmission adds the ability to connect remote USB-HID devices to a host computer through an extender pair. Transparent USB2.0, on the other hand, provides support for various types of USB2.0 devices like webcams, microphones, touch displays just to name a few.
Features
USB2.0 transmission
with support for USB2.0 devices
Can send or receive remote power
through CATx cable (PoE PSE, PoE PD)
Allows for the transmission of HDMI 2.0
emb. audio, Ethernet, RS-232 and USB2.0
Supports HDMI 4K signal formats
4K UHD @60Hz RGB 4:4:4, up to 18 Gbps
HDR and Low Latency Dolby Vision
2 channels of LPCM audio
embedded in the HDMI stream can be de-embedded to Dante/AES67 streams
Other Features
HDCP 2.3 compliant
Compatible with third-party SDVoE devices and controllers
Command injection on RS-232 ports
Ethernet extension (1 Gbps)
Compatible Devices
6 products
Supplied Accessories
3 products
